Golden Oscar Party Decorations

Every year I’m trying to add just a little bit more to Oscar Party.  This year design inspiration came from (where else?!) Pinterest.  I saw Hank & Hunt’s giant gold wall decoration and I knew I needed that sparkle at my party.  While I loved the medallion, I really wanted it to scream Oscar and what better way to do that than with a lovely Oscar statue?  Oscar Party Decoration

Isn’t he cute? To begin, I used the projection method to trace the outline of my statue onto foam core.  Oscar Party DecorationI then spray painted the foam core gold, because I figured a bit of the edge would be visible and I didn’t want any white peeking through. I used the same method as it inspiration post and bought the same gold mylar cord for my Oscar statue.

But since my design had a few more subtle curves than just a circle, I needed to cut the rope pieces a bit smaller – just about 1″ long.
Oscar Party Decoration

I then taped the pieces down to both sides of the statue.Oscar Party DecorationMake sure to only over hang the edges of the foam core a little bit or the statue will come out looking like a giant sparkly blob. Oscar Party DecorationYou know I know this because I first made a giant sparkly blob and had to go back and redo it.

But he’s all done and I love my shiny gold Oscar man!  I inserted a pin in the top and tied some fishing line to the pin and then thumb tacked it into the ceiling.  He’s right at home with my tissue paper pom poms and ready to be part of a fab tablescape……which I’ll have to take a picture of when it’s all decked out.

But if a tablescape isn’t in your future, I think this would be a great addition to the photobooth prop box.

–Martta

Race for the Cure Quilt

Regular followers of the blog might have noticed that we didn’t have too many posts over the Summer and into the Fall.  And why was that you ask?  Well, Heather’s computer died which made photo editing difficult….and I was covered up by a massive project.

What project you ask?  Well, in the category of “how do I get myself into these things?” I was making a gianormous quilt for the Race for the Cure.  Race for the Cure Quilt Top

You see, last year in the photo booth we were a bit off in our fabric measurements.  So this year I was thinking ahead and in our August planning meeting I said I was going to sew a backdrop that would be the right size.  I even had an idea that I could use past race t-shirts in it.  That’s when Deb said “oh wouldn’t it be great if you could make it into a quilt that we could then auction off at the Perfectly Pink Party in May?”

Don’t let those doe eyes fool you folks, that Deb Davis Groves will go after what she wants.

I instantly regretted mentioning that I was taking a class on quilting and working on my first quilt as I gave her a somewhat blank stare and someone, apparently me, uttered “Uh, yeah, sure”.

WHAT.  Who goes from making a BABY sized quilt to a KING sized quilt?  Apparently this girl.  Because Deb and Kheira produced the t-shirts I needed with AMAZING speed.  Well, shoot, now I really gotta do this.

So I did what every sane person does and took the t-shirts home, folded them up and then ignored them for WEEKS.

I got to the point of no return and I HAD to do something.  See, what was dragging me down was my design of the quilt.  Race for the Cure Original Quilt Plan

When it got down to brass tacks, I just didn’t like it, it was too traditional for me.  So I finally sat my butt down and designed something new.  (Woah, pretty close to how it turned out right?!)Race for the Cure Quilt Inspiration

I even went to the trouble to check out the proportion of the quilt by putting in fake people from last year’s photo booth – I’ll spare you that photo.  So I ran right out and picked up 17 yards of fabric.  Yes.  17 yards.  Those long pink stripes with no seams do not come without a lot of fabric.  Thank goodness for JoAnn’s coupons!!!  Prewashing and 17 yards of ironing ensued.

I got the top assembled pretty quickly with a bit of help from The BunkHouse on how to prep the t-shirts.  That took a whole weekend.  (And it was a good thing I had 16 t-shirts and only needed 15 because I immediately cut the first one waaaay wrong!) Race for the Cure Quilt in Process

After that, the top went together quickly and it looked wonderful!  I admired it on the wall, instagrammed it, sent pictures of it to my friends and, in general, loved it.

But all good times have to come to an end, and I need to get to the actual quilting part of this quilt!  So I took it down off the wall and started to tackle pinning and quilting of this mighty beast.

We wrestled.  We fought.  There was smoothing and re-smoothing.  It took up the entire floor of my living room – The quilt is 117″ by 97″!! (or about 10 feet by 8 feet).  It took my entire collection of 300 quilting pins and I felt like that wasn’t even enough!  So I just started quilting.  (Not to mention, but squee!  Look at that adorable ribbon fabric I found for the backing – I bought the entire 8 yard bolt to make it!)Race for the Cure Quilt BorderI will say it was quite and effort – I was just doing a few basic lines across the quilt with some wavy ones through the pink bands.  It took up the entire dining room table and then some.  I had systems of chairs set up to “catch” the quilt as it came off the machine – I didn’t want it to drop to the floor and pull the stitches I was working on with the weight of the fabric.

Then, how to quilt the t-shirts themselves.  I really wanted to quilt around each ribbon, but I don’t own a long arm quilting machine and cramming a king size quilt through my tiny machine was a serious effort.  I broke three needles on the first two ribbons.  Then we came to an understanding, this quilt and I.  With a complicated set up of rolling, turning, stitching, twirling, re-rolling, stitching some more, I was able to quilt each of the ribbons – just BARELY in time for the race.

In fact, I hadn’t even finished quilting all the ribbons when I just said “Dang it!  I’ve got to get this binding on!” It was the weekend before the race and I needed that on the quilt in order for it to be ready for Race day – I’m a slow hand sewer so stitching over 35 feet of binding was intimidating with only seven days to go.  I took that darn quilt with me everywhere!  It went to packet pick up, it went to work during lunch hours, it spent a long time with me in front of the TV just sewing.  I’m still not really sure how it got done.  But, boy, it did, thereby allowing me to finish the last ribbon the NIGHT before the race.

When I arrived at the Survivor’s tent on Sunday at 4:30am, the first order of business was to take off the quilting pins…I still think we missed a few.  It was still dark so you can understand how we missed ‘em!

But what a smashing success!  Thanks to the photobooth props from last year and a wonderful augmentation from Jill D we were slammed for the entire event.  I LOVED these pictures of survivors and their families having a blast – it made all the pain worthwhile.  Race for the Cure Quilt

And now, I get to pass the quilt on.  Komen Austin is hosting the Perfectly Pink Party on May 4th and this quilt will be one of the items auctioned!  Check out events details at:  komenaustin.org/perfectlypinkparty and go place your bid!!  It all goes to a good cause!

–Martta

Race for the Cure Photo Backdrop

It’s that time of year where the prep for Komen Race for the Cure starts to really kick in.  Last year the photo booth in the Survivor’s Tent was a huge success – with a line all day long.  This year we’re coming back with double the fun of two photo booths.  This past weekend we had a decorating party and one of the items we made was a hand painted photo backdrop – here it is hanging in the office at Komen, just waiting for race day!

Our photo booth is an 8′x8′ background so I picked up 10 yards of simple white fabric, cut it into thirds and sewed all three pieces together to create a 10′x10′ canvas.  Inspired by a hand written poem backdrop at a wedding, our committee chair suggested we use the lyrics from the Martina McBride song “I’m Gonna Love You Through It”.

So I laid down some plastic drop cloth and someone ironed the back drop and we taped it down to get started.  And I just started painting.  I had a handy piece of lathe to help me keep in a straight line and it was fairly slow work so I could make sure I was sticking to a fairly level mark.
Did I mention this was slow work?  Thank goodness I had a moral support committee to read me the lyrics, make sure I was spelling words right and keep me talking so I wouldn’t notice that my hips were killing me after two hours of sitting on the concrete floor!
 But it turned out sensational!  I can’t wait to see some folks take pictures in front of it!

–Martta